Talk to an engineer

Prototype

Wireless charging for body-worn electronics

A transmitter coil in the seat and a receiver in the jacket: the devices a person wears charge by themselves as soon as they sit down, with no cable between body and vehicle.

Client
Siralab
Industry
Robotics, automation and AI
Charging
Automatic, when the wearer sits down
Transmitter
Coil with ferrite and aluminium shield, in the seat back
Receiver
Flat coil integrated in the jacket
Power class
Low
Wireless charging for body-worn electronics: Siralab pilot

01Context

Siralab is an Italian technology company specialising in robotics, automation and artificial intelligence. People who work on the move carry several battery-powered devices on the body: radios, sensors, lights and displays.

02Challenge

Keeping body-worn devices charged means cables and connectors between each device and the vehicle, handled by hand every time someone gets in. It costs time, adds failure points and takes attention away from the task.

03Solution

  1. Coil in the seat

    A transmitter coil with a ferrite and aluminium shield sits in the seat back, invisible to the user.

  2. Receiver in the jacket

    A flat receiver coil integrated in the jacket collects the power through the fabric.

  3. Automatic charging

    Charging starts by itself when the wearer sits down in the vehicle and stops when they leave.

  4. Designed by simulation

    Transmitter and receiver geometries sized with electromagnetic models before the prototype.

04Results

  • Body-worn devices charge automatically on entering the vehicle.
  • No wired connections to make or manage between devices and vehicle.
  • Less time spent on manual charging and fewer distractions from the task.
  • A seamless move from the vehicle to the field and back.
Next projectWPTxHeartWPTxHeart: wireless power for a left ventricular assist deviceRead the case

Similar challenge?

Tell us about your vehicles, robots or site. An engineer will get back to you.

Talk to an engineer